BMW 550 Series A/C refrigerant type and capacity
GarageDex's A/C data shows the 2014 to 2015 BMW 550 Series (8 Cyl. 4.4 Eng.) uses 29.92 oz of R-134a refrigerant with PAG-46 compressor oil.
Shop R-134a Match the type on your under-hood decal
Key takeaways
- 2014 to 2015 BMW 550 Series: 29.92 oz of R-134a, 6 oz of PAG-46 oil.
- The charge is a full-system amount; a top-off adds far less.
- Do not mix refrigerant types or oils.
- A system that is empty has a leak - fix it before charging.
| Years | Engine | Refrigerant | Charge | Compressor oil |
|---|---|---|---|---|
| 2016 | 8 Cyl. 4.4 Eng. | Decal | See decal | See decal |
| 2014 to 2015 | 8 Cyl. 4.4 Eng. | R-134a | 29.92 oz | PAG-46 6 oz |
| 2012 to 2013 | 8 Cyl. 4.4 Eng. | R-134a | 30 oz | PAG-46 |
| 2011 | 8 Cyl. 4.4 Eng. | R-134a | 28 oz | PAG-46 6.8 oz |
| 2010 | 8 Cyl. 4.4 Eng. | R-134a | 28 oz | PAG-46 6.1 oz |
| 2010 | 8 Cyl. 4.8 Eng. | R-134a | 28 oz | PAG-46 6.1 oz |
| 2008 to 2009 | 8 Cyl. 4.8 Eng. | R-134a | 29 oz | PAG-46 6.3 oz |
| 2006 to 2007 | 8 Cyl. 4.8 Eng. | R-134a | 27 oz | PAG-46 6.8 oz |
| 2006 to 2007 | 8 Cyl. 4.8 Eng. | R-134a | 27 oz | PAG-46 5.9 oz |
Recharge supplies for your BMW 550 Series
Buy the refrigerant type shown for your year and confirm it against the under-hood decal. R-1234yf cans cost more and need a matching coupler.
R-134aR-134a recharge can with a gaugeShop cans Manifold gauge setReads high and low side pressure properlyShop gauges Leak detection kitFind the leak before you spend on refrigerantShop kits
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other BMW models
128 Series135 Series228 Series318 Series320 Series323 Series325 Series328 Series330 Series335 Series525 Series528 Series530 Series535 Series540 Series545 Series640 Series645 Series650 Series740 Series745 Series750 Series760 Series840 Series
Source: Four Seasons - Compressor / System Refrigerant & Lubricant Specs. The under-hood A/C decal is the primary source for your exact car - it overrides any table. Charges assume a clean system with a new drier.