2027 Jeep Wrangler coolant capacity
The 2027 Jeep Wrangler holds about 9.9 to 10.7 quarts of coolant, depending on the engine - the full cooling-system capacity when cold.
Key takeaways
- The 2027 Jeep Wrangler holds about 9.9 to 10.7 quarts of coolant total, depending on engine.
- This is the full cooling-system fill with the engine cold.
- Refill to the marked level, and use the coolant type your owner's manual specifies.
| Engine | Capacity | Liters |
|---|---|---|
| 2.0 | 9.9 qt | 9.4 L |
| 3.6 | 10.7 qt | 10.1 L |
2027 carries over from 2026: Car and Driver describes the 2027 Wrangler as a carryover of the 2026 model. The EPA lists no new engine for 2027. Capacities are carried from the same-generation source data - confirm in your 2027 owner's manual.
What a coolant change costs
At roughly 2.5 to 2.7 gallons of capacity, the coolant itself is about $38 to $81. A shop charges $70 to $120 for a drain and fill, or $100 to $250 for a full flush. Use the specification the manufacturer lists - mixing coolant chemistries is what turns a cheap service into a water-pump job.
Ranges aggregated from published 2026 US repair-cost and parts price guides, including RepairPal and Car Talk. Prices vary by region, brand, and vehicle - treat these as a sanity check on a quote, not a fixed price. Drain and fill vs flush →
Coolant for your 2027 Jeep Wrangler
Buy the coolant type your owner's manual specifies and check it on the jug - the wrong type can gel or corrode the system. Amazon's results are filtered to this vehicle, but the type is on you to match. To compare prices and reviews:
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.