How much transmission fluid does a 2013 Scion FR-S take?

7.9 quarts as a total fill for the TX6A transmission. A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2013 Scion FR-S use?

The source names WS for this year. Use a fluid that states that specification on the bottle.

What brake fluid does a 2013 Scion FR-S take?

Check the brake fluid reservoir cap - it states the DOT grade. DOT 3 and DOT 4 can be mixed; DOT 5 silicone fluid cannot.

2013 Scion FR-S transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2013 Scion FR-S uses the TX6A automatic transmission, which holds 7.9 quarts of fluid as a total fill, specified as WS.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: TX6A automatic transmission, 7.9 qt total fill, WS fluid.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid grade: read it off the reservoir cap.
The fluid specification is named by the source - buy a fluid that lists it.

2013 Scion FR-S fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
2.0L 4-cyl	TX6A automatic	7.9 qt	WS	see reservoir cap	rear GL-5 75W-85 1.16 qt

Fluids for the 2013 Scion FR-S

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

WS fluidYou need about 8 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2013 Scion FR-S specs

All specs Engine oil Coolant capacity Maintenance schedule

Other FR-S years

2016 2015 2014

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.