How much transmission fluid does a 2007 Scion tC take?

8.6 quarts as a total fill for the U241E transmission. A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2007 Scion tC use?

The source names WS for this year. Use a fluid that states that specification on the bottle.

What brake fluid does a 2007 Scion tC take?

Check the brake fluid reservoir cap - it states the DOT grade. DOT 3 and DOT 4 can be mixed; DOT 5 silicone fluid cannot.

2007 Scion tC transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2007 Scion tC uses the U241E automatic transmission, which holds 8.6 quarts of fluid as a total fill, specified as WS.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: U241E automatic transmission, 8.6 qt total fill, WS fluid.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid grade: read it off the reservoir cap.
The fluid specification is named by the source - buy a fluid that lists it.

2007 Scion tC fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
2.4L 4-cyl	U241E automatic	8.6 qt	WS	see reservoir cap	-

Fluids for the 2007 Scion tC

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

WS fluidYou need about 9 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2007 Scion tC specs

All specs Engine oil Coolant capacity Maintenance schedule

Other tC years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2006 2005

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.