How much transmission fluid does a 2017 Subaru BRZ take?

7.9 quarts as a total fill for the TX6A transmission. A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2017 Subaru BRZ use?

The source names WS for this year. Use a fluid that states that specification on the bottle.

What brake fluid does a 2017 Subaru BRZ take?

Check the brake fluid reservoir cap - it states the DOT grade. DOT 3 and DOT 4 can be mixed; DOT 5 silicone fluid cannot.

2017 Subaru BRZ transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2017 Subaru BRZ uses the TX6A automatic transmission, which holds 7.9 quarts of fluid as a total fill, specified as WS.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: TX6A automatic transmission, 7.9 qt total fill, WS fluid.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid grade: read it off the reservoir cap.
The fluid specification is named by the source - buy a fluid that lists it.

2017 Subaru BRZ fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
2.0L 4-cyl	TX6A automatic	7.9 qt	WS	see reservoir cap	rear 75W-90 1.27 qt

Fluids for the 2017 Subaru BRZ

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

WS fluidYou need about 8 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2017 Subaru BRZ specs

All specs Engine oil Coolant capacity Maintenance schedule

Other BRZ years

2016 2015 2014 2013

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.