2012 Subaru Legacy transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2012 Subaru Legacy (2.5L 4-cyl) uses the TR690 CVT transmission, which holds 12.7 quarts of fluid as a total fill. Other engines on this year hold 10.1 to 12.7 quarts - see the table.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: TR690 CVT transmission, 12.7 qt total fill.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid grade: read it off the reservoir cap.
  • Fluid specification is not named by the source - use the owner's manual.
2012 Subaru Legacy fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
2.5L 4-cylTR690 CVT12.7 qtper owner's manualsee reservoir caprear GL-5 75W-90 0.85 qt
front GL-5 80W-90 1.48 qt
2.5L 4-cylTR690 CVT12.7 qtper owner's manualsee reservoir caprear GL-5 75W-90 0.85 qt
front GL-5 80W-90 1.48 qt
3.6L 6-cylTG5D8 automatic10.1 qtper owner's manualsee reservoir caprear GL-5 80W-90 0.85 qt
front GL-5 75W-90 1.48 qt

Fluids for the 2012 Subaru Legacy

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2012 Subaru Legacy specs

Other Legacy years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.