How much transmission fluid does a 2021 Toyota C-HR take?

7.6 quarts as a total fill for the K114 transmission. A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2021 Toyota C-HR use?

The source lists only a catalog code for this year, not the OEM specification, so use the fluid named in your owner's manual or on the dipstick.

What brake fluid does a 2021 Toyota C-HR take?

DOT 3 or DOT 4, per the manufacturer note. It is also printed on the brake fluid reservoir cap.

2021 Toyota C-HR transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2021 Toyota C-HR uses the K114 automatic transmission, which holds 7.6 quarts of fluid as a total fill. Brake fluid is DOT 3 or DOT 4.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: K114 automatic transmission, 7.6 qt total fill.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid: DOT 3 or DOT 4.
Fluid specification is not named by the source - use the owner's manual.

2021 Toyota C-HR fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
2.0L 4-cylinder 3ZR-FAE	K114 automatic	7.6 qt	per owner's manual	DOT 3 or DOT 4	-

Fluids for the 2021 Toyota C-HR

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

Transmission fluidYou need about 8 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2021 Toyota C-HR specs

All specs Engine oil Coolant capacity Maintenance schedule

Other C-HR years

2022 2020 2018

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.