Audi E-Tron Quattro lug nut torque

GarageDex's lug nut torque data shows the 2019 to 2021 Audi E-Tron Quattro wheel lug nuts torque to 120 ft-lbs. Across the Audi lineup, that guide lists 14mm x 1.50 wheel bolts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 120 ft-lbs for the 2019 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Audi E-Tron Quattro lug nut torque by year
YearsTorquePattern
2019 to 2021120 ft-lbsStar pattern
Audi E-Tron Quattro lug nut thread size
YearsThread size
1980 to 202014mm x 1.50 bolt

The guide below does not break out the Audi E-Tron Quattro separately - this is the general Audi thread size, same source.

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Audi E-Tron Quattro.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Audi E-Tron Quattro wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 120 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Audi models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.