Chevrolet Colorado lug nut torque

GarageDex's lug nut torque data shows the 2015 to 2021 Chevrolet Colorado wheel lug nuts torque to 140 ft-lbs. They are 14mm x 1.50 lug nuts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 140 ft-lbs for the 2015 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Chevrolet Colorado lug nut torque by year
YearsTorquePattern
2015 to 2021140 ft-lbsStar pattern
2004 to 2012100 ft-lbsStar pattern
Chevrolet Colorado lug nut thread size
YearsThread size
2015 to 202014mm x 1.50
2004 to 201412mm x 1.50

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Chevrolet Colorado.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Chevrolet Colorado wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 140 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Same car, other specs: Chevrolet Colorado specs hub and battery size.

Other Chevrolet models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.