Mini Cooper M12 Bolt lug nut torque

GarageDex's lug nut torque data shows the 2002 to 2007 Mini Cooper M12 Bolt wheel lug nuts torque to 88 ft-lbs. Across the Mini lineup, that guide lists 14mm x 1.25 wheel bolts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 88 ft-lbs for the 2002 to 2007 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Mini Cooper M12 Bolt lug nut torque by year
YearsTorquePattern
2002 to 200788 ft-lbsStar pattern
Mini Cooper M12 Bolt lug nut thread size
YearsThread size
2007 to 201914mm x 1.25 bolt

The guide below does not break out the Mini Cooper M12 Bolt separately - this is the general Mini thread size, same source.

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Mini Cooper M12 Bolt.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Mini Cooper M12 Bolt wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 88 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Mini models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.