Suzuki DR350 SE-R,S Chain Size and Sprocket Teeth

GarageDex's manufacturer-catalogue data shows the 1994-1995 Suzuki DR350 SE-R,S uses a 520 chain with 15-tooth front and 41-tooth rear sprockets from the factory. (110 links)

Chain and sprocket fitment by year

YearsChainLinksFront teethRear teeth
1994-199552011015 (JTF432)41 (JTR822)

Part numbers in parentheses are the manufacturer's stock-gearing sprocket codes, useful for matching a replacement.

Verified fitment
Sourced from a chain and sprocket manufacturer's own application catalogue. Reviewed by the GarageDex editorial team - how we verify →

Chain and sprockets for the Suzuki DR350 SE-R,S

Match the pitch (520) and tooth counts in the table - chain and sprockets are a matched set, and a mismatched pitch will not fit the sprockets at all.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Frequently asked

What chain size does a Suzuki DR350 SE-R,S use?

GarageDex's manufacturer-catalogue data shows the 1994-1995 Suzuki DR350 SE-R,S uses a 520 chain with 15-tooth front and 41-tooth rear sprockets from the factory. (110 links)

What is the stock gearing on a Suzuki DR350 SE-R,S?

15-tooth front and 41-tooth rear from the factory, part numbers front JTF432, rear JTR822.

What changes if I go +2 teeth on the rear sprocket?

Going up 2 teeth on the rear sprocket (or down 1-2 on the front) lowers the gearing: quicker acceleration off the line, but a lower top speed, and the chain usually needs to be 1-2 links longer to keep enough wrap on the front sprocket - a shop or the sprocket's fitment chart will confirm the exact link count for that combination. This is a generic mechanical rule, not a claim about this specific model's aftermarket options.

How many links does a Suzuki DR350 SE-R,S chain have?

110 links at stock length and gearing, per the manufacturer catalogue.

Same bike, other specs: Suzuki DR350SE battery size.

Other Suzuki models

Source: JT Sprockets - Online Catalogue, a chain and sprocket manufacturer's own application catalogue. Chain and sprocket sizing is factory-stock as JT publishes it - aftermarket gearing changes (see the FAQ) are not reflected here.