2010 Chevrolet Spark Oil Type & Capacity
The 2010 Chevrolet Spark takes 4 quarts (3.75 liters) of 5W-30 oil with a filter change.
Key takeaways
- Oil: 5W-30, about 4 quarts with a filter change.
- Use a quality full synthetic that meets this viscosity grade.
- Change the oil filter every time you change the oil.
Oil viscosity5W-30
Capacity (with filter)4 qt
| Engine | Viscosity | Capacity |
|---|---|---|
| 1.0 | 5W-30 | 4 qt / 3.75 L |
Capacities are with an oil-filter change. Confirm on the dipstick after refilling.
Verified fitLast checked
Sources: cararac - Chevrolet Spark
Reviewed by the GarageDex editorial team against manufacturer and retailer fitment data.
Capacities shown include the oil filter. Always confirm against your dipstick after refilling.
Oil & filter for the 2010 Chevrolet Spark
You need 5W-30 oil (4 quarts with a filter change). Buy the oil and a filter together; a DIY oil change takes about 30 minutes, or any shop can do it.
Shop 5W-30 full-synthetic oil on AmazonA 5-quart jug covers an oil changeShop an oil filter for the 2010 Chevrolet Spark on AmazonBuy the filter with the oil
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Shop 5W-30 oil + filterFrequently asked
How much oil does a 2010 Chevrolet Spark take?
It takes 4 quarts (3.75 liters) with an oil-filter change.
What kind of oil does a 2010 Chevrolet Spark use?
5W-30 full-synthetic motor oil.
See where this sits in our study of the most common engine oil viscosities in the US.