Lincoln oil life light reset
To reset the oil life light on a Lincoln (Most 2011+ models (shares Ford's pedal method)): Switch the ignition on without starting the engine. Fully press the accelerator and brake pedals at the same time and hold. After about three seconds a message confirms the reset is in progress; keep holding. Full steps below.
Key takeaways
- Change the oil first - the light is only a reminder.
- 1 procedure listed for Lincoln, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Most 2011+ models (shares Ford's pedal method)
- Switch the ignition on without starting the engine.
- Fully press the accelerator and brake pedals at the same time and hold.
- After about three seconds a message confirms the reset is in progress; keep holding.
- After about 25 seconds a message confirms the reset is complete; release both pedals and switch the ignition off.
Source: Ford owner's manual (fordservicecontent.com) - Oil Change Indicator Reset (shared Ford Motor Company procedure) - independent references, not the manufacturer.
Tools that help
These fit any car. A scanner with service-reset functions handles the makes that have no button procedure.
OBD-II scannerResets service lights on cars with no manual procedureShop Reminder stickersWrite the next due mileage so the light is a backup, not the planShop stickers
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Lincoln tire pressure light reset →