Nissan oil life light reset
To reset the oil life light on a Nissan (Models with a dedicated Reset button): Turn the ignition on without starting the engine. Navigate to Oil & Filter on the display and press Reset (or hold the physical Reset button until the oil life percentage or light starts blinking). Release, then press and hold again until the reset completes.
Key takeaways
- Change the oil first - the light is only a reminder.
- 2 procedures listed for Nissan, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Models with a dedicated Reset button
- Turn the ignition on without starting the engine.
- Navigate to Oil & Filter on the display and press Reset (or hold the physical Reset button until the oil life percentage or light starts blinking).
- Release, then press and hold again until the reset completes.
Sources: Jim Bass Nissan - How to reset the Nissan oil change light, AutoZone - Oil Change Light Reset Guide - independent references, not the manufacturer.
Models without a dedicated button
- Turn the ignition switch to ON without starting the engine.
- Fully depress the accelerator pedal slowly three times within about 10 seconds.
- Confirm the light clears; if not, cycle the ignition and repeat.
Source: JustAnswer - How to reset oil change light without manual instructions - independent references, not the manufacturer.
Tools that help
These fit any car. A scanner with service-reset functions handles the makes that have no button procedure.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Nissan tire pressure light reset →