Acura tire pressure light reset
To reset the tire pressure light on a Acura (Older models with a physical TPMS button under the dash): Inflate all tires to the pressure on the door-jamb sticker. Turn the ignition to ON without starting the engine. Press and hold the TPMS reset button until the tire pressure light blinks, then release. Full steps below.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Acura, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Older models with a physical TPMS button under the dash
Reset button
- Inflate all tires to the pressure on the door-jamb sticker.
- Turn the ignition to ON without starting the engine.
- Press and hold the TPMS reset button until the tire pressure light blinks, then release.
- Start the car and drive for several minutes to let the system relearn.
Source: Southview Acura - How to reset tire pressure light - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.