BMW tire pressure light reset
To reset the tire pressure light on a BMW (iDrive-equipped models): Inflate all four tires to the correct cold pressure. Turn the ignition on and open Settings, then Vehicle in iDrive. Select Tyre/Tire Pressure, then initiate a new RDC measurement or reset. Full steps below.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for BMW, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
iDrive-equipped models
Dashboard menu
- Inflate all four tires to the correct cold pressure.
- Turn the ignition on and open Settings, then Vehicle in iDrive.
- Select Tyre/Tire Pressure, then initiate a new RDC measurement or reset.
- Drive for a short distance so the system confirms the new baseline.
Some models require the reset to be triggered while the car is moving rather than parked; check the on-screen prompt.
Source: Service Reset - Reset the Tyre Pressure Monitor (TPMS) BMW - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.