Genesis tire pressure light reset
To reset the tire pressure light on a Genesis (Current models (shares Hyundai/Kia platform)): Inflate all tires to the placard pressure. Turn the ignition on without starting the engine. Press and hold the TPMS reset button for a few seconds until the low-pressure indicator confirms. Full steps below.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Genesis, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Current models (shares Hyundai/Kia platform)
Reset button
- Inflate all tires to the placard pressure.
- Turn the ignition on without starting the engine.
- Press and hold the TPMS reset button for a few seconds until the low-pressure indicator confirms.
- Drive for about 20 minutes so the system stores the new pressures.
No Genesis-specific source was independently confirmed; this follows Hyundai/Kia's documented TPMS SET-button procedure since Genesis shares that platform and parts catalog.
Source: Kia owner's manual - TPMS reset procedure (shared Hyundai Motor Group platform) - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.