Hyundai tire pressure light reset
To reset the tire pressure light on a Hyundai (Most models with a TPMS reset button): Turn the vehicle off, inflate all tires to the placard pressure, then turn the ignition on without starting the engine. Hold the TPMS reset button (usually under the steering wheel) until the tire pressure light blinks three times, then release. Start the car and wait about 20 minutes for the sensors to refresh.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Hyundai, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Most models with a TPMS reset button
Reset button
- Turn the vehicle off, inflate all tires to the placard pressure, then turn the ignition on without starting the engine.
- Hold the TPMS reset button (usually under the steering wheel) until the tire pressure light blinks three times, then release.
- Start the car and wait about 20 minutes for the sensors to refresh.
Sources: Stivers Hyundai - Hyundai TPMS reset guide, Checkered Flag Hyundai World - How to reset Hyundai tire pressure light - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Hyundai oil life light reset →