Kia tire pressure light reset
To reset the tire pressure light on a Kia (All current models): Park the vehicle on a level, firm surface. Inflate all tires to the pressure on the placard or driver's-side center-pillar label. Start the engine, then press and hold the TPMS SET button for about three seconds. Full steps below.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Kia, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
All current models
Reset button
- Park the vehicle on a level, firm surface.
- Inflate all tires to the pressure on the placard or driver's-side center-pillar label.
- Start the engine, then press and hold the TPMS SET button for about three seconds.
- Confirm the low-pressure indicator blinks for four seconds and turns off (or the cluster shows 'Tire pressures stored').
- Drive for about 20 minutes to store the new pressures in the system.
Source: Kia owner's manual (ownersmanual.kia.com) - TPMS reset procedure.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.