Mini tire pressure light reset
To reset the tire pressure light on a Mini (Current models with the Vehicle Status menu): Inflate all tires to the correct pressure. Open the Apps menu, select Vehicle, then Vehicle Status, then Tire Pressure. With the vehicle in a drive-ready state (but not moving), select Perform Reset, then drive off.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 2 procedures listed for Mini, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
Current models with the Vehicle Status menu
Dashboard menu
- Inflate all tires to the correct pressure.
- Open the Apps menu, select Vehicle, then Vehicle Status, then Tire Pressure.
- With the vehicle in a drive-ready state (but not moving), select Perform Reset, then drive off.
Source: MINI USA FAQ - How do I reset the Tire Pressure Monitor in my MINI.
Older models with a physical reset button
Reset button
- Turn the ignition to position 2.
- Press and hold the reset button until the yellow indicator on the dash lights up for a few seconds, confirming the reset.
Source: MiniCarParts.net - Resetting the MINI Tire Pressure Monitoring System (TPMS) - independent references, not the manufacturer.
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.