Volvo tire pressure light reset
To reset the tire pressure light on a Volvo (All current models): Switch off the engine and inflate the tires to Volvo's recommended pressure. Put the ignition in mode I or II. Press the MY CAR key in the center console (or open the corresponding touchscreen menu), select Settings, then Car Settings, then Tire Pressure. Full steps below.
Key takeaways
- Inflate every tire to the door-jamb pressure first - the light is telling you something.
- 1 procedure listed for Volvo, by model year or family.
- No special tool needed for the procedures below.
- If it does not work, confirm your exact year in the owner's manual.
All current models
Dashboard menu
- Switch off the engine and inflate the tires to Volvo's recommended pressure.
- Put the ignition in mode I or II.
- Press the MY CAR key in the center console (or open the corresponding touchscreen menu), select Settings, then Car Settings, then Tire Pressure.
- Select Calibrate Tire Pressure and confirm.
- Drive at a speed above about 20 mph continuously for at least 10 minutes; calibration finishes automatically without an on-screen confirmation.
Sources: Volvo Cars Support - Tire Pressure Monitoring System (TPMS), recalibrating (S60 Cross Country), Volvo Cars Support - V60 Tyre pressure monitoring (TPMS), adjust (recalibration).
Tools that help
These fit any car. A gauge that reads to 0.5 psi takes the guesswork out of the relearn.
Digital tire gaugeSet every tire to the door-jamb pressure before any resetShop Tire inflatorSets an exact pressure from the car's 12V socketShop inflators
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.