Dodge Journey A/C refrigerant type and capacity

GarageDex's A/C data shows the 2016 to 2018 Dodge Journey (4 Cyl. 2.4 Eng.) uses 20 oz of R-1234yf refrigerant. Earlier years used R-134a, so check the year row below.

Shop R-1234yf Match the type on your under-hood decal

Key takeaways

  • 2016 to 2018 Dodge Journey: 20 oz of R-1234yf.
  • The charge is a full-system amount; a top-off adds far less.
  • This model switched refrigerant types over its life (R-1234yf, R-134a) - use your year's row.
  • A system that is empty has a leak - fix it before charging.
Dodge Journey A/C refrigerant and oil by year
YearsEngineRefrigerantChargeCompressor oil
2016 to 20184 Cyl. 2.4 Eng.R-1234yf20 oz-
2016 to 20184 Cyl. 2.4 Eng.R-1234yf31.2 oz-
2016 to 20184 Cyl. 3.6 Eng.R-1234yf20 oz-
2016 to 20184 Cyl. 3.6 Eng.R-1234yf31.2 oz-
20154 Cyl. 3.6 Eng.R-134a22.08 ozPAG-100 3.4 oz
20154 Cyl. 3.6 Eng.R-134a32 ozPAG-100 3.4 oz
20144 Cyl. 2.4 Eng.R-134a32 ozPAG-100 3.4 oz
20146 Cyl. 3.6 Eng.R-134a22.08 ozPAG-100 3.4 oz
2011 to 20134 Cyl. 2.4 Eng.; w/o Rear ACR-134a22 ozPAG-100 3.4 oz
2011 to 20134 Cyl. 2.4 Eng.; w/ Rear ACR-134a32 ozPAG-100 3.4 oz
2011 to 20136 Cyl. 3.6 Eng.; w/o Rear ACR-134a22 ozPAG-100 3.4 oz
2011 to 20136 Cyl. 3.6 Eng.; w/ Rear ACR-134a32 ozPAG-100 3.4 oz
2009 to 20104 Cyl. 2.4 Eng.; w/o Rear ACR-134a22 ozPAG-100 3.4 oz
2009 to 20104 Cyl. 2.4 Eng.; w/ Rear ACR-134a32 ozPAG-100 3.4 oz
2009 to 20106 Cyl. 3.5 Eng.; w/o Rear ACR-134a22 ozPAG-100 3.4 oz
2009 to 20106 Cyl. 3.5 Eng.; w/ Rear ACR-134a32 ozPAG-100 3.4 oz

Recharge supplies for your Dodge Journey

Buy the refrigerant type shown for your year and confirm it against the under-hood decal. R-1234yf cans cost more and need a matching coupler.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Same car, other specs: Dodge Journey specs hub.

Other Dodge models

Source: Four Seasons - Compressor / System Refrigerant & Lubricant Specs. The under-hood A/C decal is the primary source for your exact car - it overrides any table. Charges assume a clean system with a new drier.