2013 Subaru BRZ Headlight Bulb Size

The 2013 Subaru BRZ uses a single D4S bi-xenon bulb per side, serving both low and high beam.

Key takeaways

  • Low beam: D4S. High beam: D4S.
  • The D4S low beam is HID (xenon), not halogen - it runs through a ballast at high voltage, so it is a replaceable bulb but not a casual swap.
  • Fog, signal, and reverse bulbs use different sizes - check each before buying.
Low beamD4S
High beamD4S
Fog light
2504
Front turn signal
7440
Brake / tail
LED
Rear turn signal
7440
Reverse / backup
921
License plate
194
Verified fitLast checked
Reviewed by the GarageDex editorial team against manufacturer and retailer fitment data.
A single D4S bi-xenon bulb per side covers both beams, switching between them with a shield inside the projector. Fog lights take a 2504 bulb, which is a separate size from the headlights. Note that sizes can vary by trim (HID D4S standard on US BRZ; brake/tail LED assembly not user-replaceable; fog=2504/PSX24W), so check your existing bulb if your car is optioned differently.

Where to buy bulbs for the 2013 Subaru BRZ

Headlight bulbs dim over time, so replace them in pairs even if only one has failed. HID bulbs run through a ballast at high voltage, so this is a replaceable bulb but not a casual swap - disconnect the battery first. To order the exact sizes online:

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Can you replace it yourself?

The 2013 Subaru BRZ uses D4S HID (xenon) low beams. This is a real bulb you can replace, but it is not a casual swap: HID runs through a ballast at several thousand volts to strike the arc, so disconnect the battery first and never handle a live system. Replace them in pairs - xenon bulbs shift colour as they age, and a new one next to an old one is obvious. Do not touch the glass with bare fingers.

What to buy

This vehicle uses a single D4S bi-xenon bulb per side, serving both low and high beam. There is no second bulb and no second filament - an HID bulb is an arc tube, not a filament, and the projector switches between beams with a mechanical shield that moves out of the light path. So one pair of D4S covers both beams. Replace them in pairs regardless. Bulbs from the same batch age at the same rate, so when one goes the other is usually close behind, and a fresh bulb beside a tired one is visibly brighter and unevenly aimed. Doing both at once costs a few dollars more and saves doing the job twice.

Headlight bulbs for a 2013 Subaru BRZ
BulbCoversTypeBuy
D4Slow and high beamHIDa pair

D4S is a widely used headlight bulb, fitted to 1.8% of the vehicles we hold specs for. Any parts store will have it, and you are not restricted to the dealer.

Every bulb on this vehicle

Headlights get the attention, but the small bulbs are what fail an inspection. A burnt-out brake or turn bulb is also the cheapest ticket you will ever get, and most of these are a few dollars and a twist to change.

2013 Subaru BRZ bulb sizes by position
PositionBulbType
Low beam (headlight)D4SHID
High beamD4SHID
Fog light2504Miniature
Front turn signal7440Miniature
Brake / tailLEDLED
Rear turn signal7440Miniature
Reverse / backup921Miniature
License plate194Miniature

HID D4S standard on US BRZ; brake/tail LED assembly not user-replaceable; fog=2504/PSX24W

Why this keeps getting harder

Headlight bulbs used to be a commodity: a handful of codes covered most cars and any of them cost a few dollars. That is ending. Across the vehicles we hold specs for, factory LED low beams went from 0% of 2000s cars to 59% of 2025-and-newer ones. LEDs last far longer, which is the upside and a real one. The tradeoff is that when they do fail, it is often not a bulb you can buy at all, and the fix moves from a $20 part to a headlight assembly.

Frequently asked

What headlight bulb does a 2013 Subaru BRZ take?

It uses a single D4S bi-xenon bulb per side, which serves both low and high beam through a shield in the projector.

Is the 2013 Subaru BRZ headlight bulb a DIY job?

The 2013 Subaru BRZ uses D4S HID (xenon) low beams. This is a real bulb you can replace, but it is not a casual swap: HID runs through a ballast at several thousand volts to strike the arc, so disconnect the battery first and never handle a live system. Replace them in pairs - xenon bulbs shift colour as they age, and a new one next to an old one is obvious. Do not touch the glass with bare fingers.

What fog light bulb does the Subaru BRZ use?

The fog lights take a 2504 bulb.

Is D4S a common headlight bulb?

D4S is a widely used headlight bulb, fitted to 1.8% of the vehicles we hold specs for. Any parts store will have it, and you are not restricted to the dealer.

See where this ranks in our study of the most common headlight bulb types in the US.

More verified specs for your 2013 Subaru BRZ

See all parts & specs for your 2013 Subaru BRZ