2010 Nissan Juke coolant capacity
The 2010 Nissan Juke holds about 6.8 to 8.3 quarts of coolant, depending on the engine - the full cooling-system capacity when cold.
Key takeaways
- The 2010 Nissan Juke holds about 6.8 to 8.3 quarts of coolant total, depending on engine.
- This is the full cooling-system fill with the engine cold.
- Refill to the marked level, and use the coolant type your owner's manual specifies.
| Engine | Capacity | Liters |
|---|---|---|
| 1.5 dCi | 7.3 qt | 6.9 L |
| 1.6 DIG-T NISMO RS (CAN) | 8.3 qt | 7.9 L |
| 1.6 ECO | 6.8 qt | 6.4 L |
| 1.6 | 7 qt | 6.6 L |
What a coolant change costs
At roughly 1.7 to 2.1 gallons of capacity, the coolant itself is about $26 to $63. A shop charges $70 to $120 for a drain and fill, or $100 to $250 for a full flush. Use the specification the manufacturer lists - mixing coolant chemistries is what turns a cheap service into a water-pump job.
Ranges aggregated from published 2026 US repair-cost and parts price guides, including RepairPal and Car Talk. Prices vary by region, brand, and vehicle - treat these as a sanity check on a quote, not a fixed price. Drain and fill vs flush →
Coolant for your 2010 Nissan Juke
Buy the coolant type your owner's manual specifies and check it on the jug - the wrong type can gel or corrode the system. Amazon's results are filtered to this vehicle, but the type is on you to match. To compare prices and reviews:
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.