2013 Acura TL transmission fluid capacity and fluid specs
GarageDex's fluid data shows the 2013 Acura TL (3.5L 6-cyl) uses the MMGA automatic transmission, which holds 7.5 quarts of fluid as a total fill. Other engines on this year hold 7.5 to 8.5 quarts - see the table.
Key takeaways
- Transmission: MMGA automatic transmission, 7.5 qt total fill.
- Total fill is the whole system; a drain-and-refill takes a third to half.
- Brake fluid grade: read it off the reservoir cap.
- Fluid specification is not named by the source - use the owner's manual.
| Engine | Transmission | Total fill | Fluid spec | Brake fluid | Gear oil |
|---|---|---|---|---|---|
| 3.5L 6-cyl | MMGA automatic | 7.5 qt | per owner's manual | see reservoir cap | - |
| 3.7L 6-cyl | MMHA automatic | 8.5 qt | per owner's manual | see reservoir cap | rear 2.64 qt transfer case 75W-90 0.42 qt |
Fluids for the 2013 Acura TL
Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other 2013 Acura TL specs
Other TL years
Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.