2010 BMW X5 transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2010 BMW X5 (3.0L 6-cyl) uses the GA6HP19Z automatic transmission, which holds 9.5 quarts of fluid as a total fill.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: GA6HP19Z automatic transmission, 9.5 qt total fill.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid grade: read it off the reservoir cap.
  • Fluid specification is not named by the source - use the owner's manual.
2010 BMW X5 fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
3.0L 6-cylGA6HP19Z automatic9.5 qtper owner's manualsee reservoir caprear 75W-140 1.27 qt
front 75W-140 0.63 qt
transfer case 0.95 qt
3.0L 6-cylGA6HP19Z automatic9.5 qtper owner's manualsee reservoir caprear 75W-140 1.06 qt
front 75W-140 0.63 qt
transfer case 0.95 qt
4.4L 8-cylGA6HP26Z automatic9.5 qtper owner's manualsee reservoir caprear 75W-90 1.27 qt
front 0.63 qt
transfer case 0.95 qt
4.8L 8-cylGA6HP26Z automatic9.5 qtper owner's manualsee reservoir caprear 75W-140 1.06 qt
front 75W-140 0.63 qt
transfer case 0.95 qt

Fluids for the 2010 BMW X5

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2010 BMW X5 specs

Other X5 years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.