2013 Cadillac Escalade transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2013 Cadillac Escalade (6.0L 8-cyl) uses the 2ML70 CVT transmission, which holds 13 quarts (12.3 L) of fluid as a total fill. Other engines on this year hold 12.4 to 13 quarts - see the table.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: 2ML70 CVT transmission, 13 qt (12.3 L) total fill.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid grade: read it off the reservoir cap.
  • Fluid specification is not named by the source - use the owner's manual.
2013 Cadillac Escalade fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
6.0L 8-cyl2ML70 CVT13 qt (12.3 L)per owner's manualsee reservoir caprear 75W-90 2.11 qt
front 75W-90 1.48 qt
transfer case 1.59 qt
6.2L 8-cyl6L80 6-speed automatic12.4 qt (11.7 L)per owner's manualsee reservoir caprear 75W-90 2.11 qt
front 75W-90 1.8 qt
transfer case 1.59 qt

Fluids for the 2013 Cadillac Escalade

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2013 Cadillac Escalade specs

Other Escalade years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.

Gear counts (for example "10-speed automatic") are from the U.S. EPA / DOE fuel economy listing for the same engine.