2013 Chevrolet Impala transmission fluid capacity and fluid specs
GarageDex's fluid data shows the 2013 Chevrolet Impala (3.6L 6-cyl) uses the 6T70 automatic transmission, which holds 9.5 quarts of fluid as a total fill.
Shop transmission fluid Match the specification on the bottle to your manual
Key takeaways
- Transmission: 6T70 automatic transmission, 9.5 qt total fill.
- Total fill is the whole system; a drain-and-refill takes a third to half.
- Brake fluid grade: read it off the reservoir cap.
- Fluid specification is not named by the source - use the owner's manual.
| Engine | Transmission | Total fill | Fluid spec | Brake fluid | Gear oil |
|---|---|---|---|---|---|
| 3.6L 6-cyl | 6T70 automatic | 9.5 qt | per owner's manual | see reservoir cap | - |
| 3.6L 6-cyl | 6T70 automatic | 9.5 qt | per owner's manual | see reservoir cap | - |
Fluids for the 2013 Chevrolet Impala
Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.
Transmission fluidYou need about 10 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other 2013 Chevrolet Impala specs
Other Impala years
Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.