2010 Chevrolet Traverse transmission fluid capacity and fluid specs
GarageDex's fluid data shows the 2010 Chevrolet Traverse uses the 6T75 6-speed automatic transmission, which holds 9.5 quarts (9.0 L) of fluid as a total fill.
Key takeaways
- Transmission: 6T75 6-speed automatic transmission, 9.5 qt (9.0 L) total fill.
- Total fill is the whole system; a drain-and-refill takes a third to half.
- Brake fluid grade: read it off the reservoir cap.
- Fluid specification is not named by the source - use the owner's manual.
| Engine | Transmission | Total fill | Fluid spec | Brake fluid | Gear oil |
|---|---|---|---|---|---|
| 3.6L 6-cyl | 6T75 6-speed automatic | 9.5 qt (9.0 L) | per owner's manual | see reservoir cap | rear 75W-90 1.06 qt transfer case 75W-90 1.06 qt |
Fluids for the 2010 Chevrolet Traverse
Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other 2010 Chevrolet Traverse specs
Other Traverse years
Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.
Gear counts (for example "10-speed automatic") are from the U.S. EPA / DOE fuel economy listing for the same engine.