How much transmission fluid does a 2012 Chrysler 300 take?

9.5 quarts as a total fill for the 8HP transmission (8.1 to 9.5 quarts across this year's engines). A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2012 Chrysler 300 use?

The source lists only a catalog code for this year, not the OEM specification, so use the fluid named in your owner's manual or on the dipstick.

What brake fluid does a 2012 Chrysler 300 take?

Check the brake fluid reservoir cap - it states the DOT grade. DOT 3 and DOT 4 can be mixed; DOT 5 silicone fluid cannot.

2012 Chrysler 300 transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2012 Chrysler 300 (3.6L 6-cyl) uses the 8HP automatic transmission, which holds 9.5 quarts of fluid as a total fill. Other engines on this year hold 8.1 to 9.5 quarts - see the table.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: 8HP automatic transmission, 9.5 qt total fill.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid grade: read it off the reservoir cap.
Fluid specification is not named by the source - use the owner's manual.

2012 Chrysler 300 fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
3.6L 6-cyl	8HP automatic	9.5 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 1.27 qt front GL-5 75W-90 0.63 qt transfer case 1.06 qt
3.6L 6-cyl	8HP automatic	9.5 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 1.16 qt front GL-5 75W-90 0.63 qt transfer case 1.06 qt
5.7L 8-cyl	NAG1 automatic	8.1 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 1.27 qt front GL-5 75W-90 0.63 qt transfer case 1.06 qt
6.4L 8-cyl	NAG1 automatic	8.1 qt	per owner's manual	see reservoir cap	rear GL-5 75W-90 1.27 qt

Fluids for the 2012 Chrysler 300

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

Transmission fluidYou need about 10 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2012 Chrysler 300 specs

All specs Engine oil Coolant capacity Maintenance schedule

Other 300 years

2018 2017 2016 2015 2014 2013 2011

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.