How much transmission fluid does a 2013 Ford F-150 take?

13.1 quarts as a total fill for the 6R80 transmission (12.4 to 13.1 quarts across this year's engines). A drain-and-refill without removing the pan replaces roughly a third to half of that, so refill to the level check point rather than pouring in the whole figure.

What transmission fluid does a 2013 Ford F-150 use?

The source lists only a catalog code for this year, not the OEM specification, so use the fluid named in your owner's manual or on the dipstick.

What brake fluid does a 2013 Ford F-150 take?

Check the brake fluid reservoir cap - it states the DOT grade. DOT 3 and DOT 4 can be mixed; DOT 5 silicone fluid cannot.

2013 Ford F-150 transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2013 Ford F-150 (3.5L 6-cyl) uses the 6R80 automatic transmission, which holds 13.1 quarts of fluid as a total fill. Other engines on this year hold 12.4 to 13.1 quarts - see the table.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

Transmission: 6R80 automatic transmission, 13.1 qt total fill.
Total fill is the whole system; a drain-and-refill takes a third to half.
Brake fluid grade: read it off the reservoir cap.
Fluid specification is not named by the source - use the owner's manual.

2013 Ford F-150 fluids by engine
Engine	Transmission	Total fill	Fluid spec	Brake fluid	Gear oil
3.5L 6-cyl	6R80 automatic	13.1 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 2.75 qt front GL-5 80W-90 1.9 qt transfer case 1.48 qt
3.7L 6-cyl	6R80 automatic	12.4 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 2.75 qt front GL-5 80W-90 1.9 qt transfer case 1.48 qt
5.0L 8-cyl	6R80 automatic	13.1 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 2.75 qt front GL-5 80W-90 1.9 qt transfer case 1.48 qt
6.2L 8-cyl	6R80 automatic	13.1 qt	per owner's manual	see reservoir cap	rear GL-5 75W-140 2.75 qt front GL-5 80W-90 1.9 qt transfer case 1.48 qt

Fluids for the 2013 Ford F-150

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

Transmission fluidYou need about 14 quarts for a full fillShop fluid DOT 3 or DOT 4 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2013 Ford F-150 specs

All specs Engine oil Maintenance schedule

Other F-150 years

2018 2017 2016 2015 2014 2012 2011 2010 2009

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.