2013 Ford Focus transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2013 Ford Focus (2.0L 4-cyl) uses the DPS6 automatic transmission, which holds 1.9 quarts of fluid as a total fill. Other engines on this year hold 1.8 to 1.9 quarts - see the table.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: DPS6 automatic transmission, 1.9 qt total fill.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid grade: read it off the reservoir cap.
  • Fluid specification is not named by the source - use the owner's manual.
2013 Ford Focus fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
2.0L 4-cylDPS6 automatic1.9 qtper owner's manualsee reservoir cap-
2.0L 4-cylDPS6 automatic1.9 qtper owner's manualsee reservoir cap-
2.0L 4-cylMMT6 (6-SPD) manual1.8 qtper owner's manualsee reservoir cap-

Fluids for the 2013 Ford Focus

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2013 Ford Focus specs

Other Focus years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.