2010 Honda Fit transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2010 Honda Fit uses the SP5A 5-speed automatic transmission, which holds 6.3 quarts (6.0 L) of fluid as a total fill.

Shop transmission fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: SP5A 5-speed automatic transmission, 6.3 qt (6.0 L) total fill.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid grade: read it off the reservoir cap.
  • Fluid specification is not named by the source - use the owner's manual.
2010 Honda Fit fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
1.5L 4-cylSP5A 5-speed automatic6.3 qt (6.0 L)per owner's manualsee reservoir cap-

Fluids for the 2010 Honda Fit

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2010 Honda Fit specs

Other Fit years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.

Gear counts (for example "10-speed automatic") are from the U.S. EPA / DOE fuel economy listing for the same engine.