2006 Toyota Camry transmission fluid capacity and fluid specs
GarageDex's fluid data shows the 2006 Toyota Camry (1MZ-FE 3L 6-cylinder XV30) uses the U250E automatic transmission, which holds 3.7 quarts of fluid as a total fill. Other engines on this year hold 3.7 to 9.3 quarts - see the table. Brake fluid is DOT 3.
Key takeaways
- Transmission: U250E automatic transmission, 3.7 qt total fill.
- Total fill is the whole system; a drain-and-refill takes a third to half.
- Brake fluid: DOT 3.
- Fluid specification is not named by the source - use the owner's manual.
| Engine | Transmission | Total fill | Fluid spec | Brake fluid | Gear oil |
|---|---|---|---|---|---|
| 1MZ-FE 3L 6-cylinder XV30 | U250E automatic | 3.7 qt | per owner's manual | DOT 3 | - |
| 2AZ-FE 2.4L 4-cylinder XV30 | U151E automatic | 9.3 qt | per owner's manual | DOT 3 | - |
| 3MZ-FE 3.3L 6-cylinder XV30 | U250E automatic | 3.7 qt | per owner's manual | DOT 3 | - |
Fluids for the 2006 Toyota Camry
Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other 2006 Toyota Camry specs
Other Camry years
Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.