GarageDex

2010 Toyota Corolla transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2010 Toyota Corolla (2AZ-FE 2.4L 4-cylinder E140-E150) uses the U250E automatic transmission, which holds 8.2 quarts of fluid as a total fill, specified as WS. Other engines on this year hold 6.9 to 8.2 quarts - see the table. Brake fluid is DOT 3.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: U250E automatic transmission, 8.2 qt total fill, WS fluid.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid: DOT 3.
  • The fluid specification is named by the source - buy a fluid that lists it.
2010 Toyota Corolla fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
2AZ-FE 2.4L 4-cylinder E140-E150U250E automatic8.2 qtWSDOT 3-
2ZR-FE 1.8L 4-cylinder E140-E150U341E automatic6.9 qtWSDOT 3-

Fluids for the 2010 Toyota Corolla

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

WS fluidYou need about 9 quarts for a full fillShop fluid DOT 3 brake fluidA quart covers a full flushShop brake fluid Fluid transfer pumpMost modern transmissions have no dipstick tube - you fill from belowShop pumps

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2010 Toyota Corolla specs

All specsEngine oilCoolant capacityMaintenance schedule

Other Corolla years

20262025202420232022202120202018201720162015201420132012201120092008200720062005

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.