2010 Toyota Highlander transmission fluid capacity and fluid specs
GarageDex's fluid data shows the 2010 Toyota Highlander (2.7L 4-cylinder 1AR-FE) uses the U760E automatic transmission, which holds 6.9 quarts of fluid as a total fill, specified as WS. Other engines on this year hold 4.4 to 9.3 quarts - see the table. Brake fluid is DOT 3.
Key takeaways
- Transmission: U760E automatic transmission, 6.9 qt total fill, WS fluid.
- Total fill is the whole system; a drain-and-refill takes a third to half.
- Brake fluid: DOT 3.
- The fluid specification is named by the source - buy a fluid that lists it.
| Engine | Transmission | Total fill | Fluid spec | Brake fluid | Gear oil |
|---|---|---|---|---|---|
| 2.7L 4-cylinder 1AR-FE | U760E automatic | 6.9 qt | WS | DOT 3 | rear GL-5 0.95 qt |
| 3.3L 6-cylinder 3MZ-FE | P310 automatic | 4.4 qt | WS | DOT 3 | rear 1.9 qt |
| 3.5L 6-cylinder 2GRFE | U151E automatic | 9.3 qt | WS | DOT 3 | rear GL-5 0.95 qt transfer case GL-5 0.95 qt |
Fluids for the 2010 Toyota Highlander
Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Other 2010 Toyota Highlander specs
Other Highlander years
Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.