2010 Toyota Tundra transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2010 Toyota Tundra (4.0L 6-cylinder 1GR-FE) uses the AB60E automatic transmission, which holds 12.3 quarts of fluid as a total fill, specified as WS. Other engines on this year hold 11.3 to 12.3 quarts - see the table. Brake fluid is DOT 3.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: AB60E automatic transmission, 12.3 qt total fill, WS fluid.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid: DOT 3.
  • The fluid specification is named by the source - buy a fluid that lists it.
2010 Toyota Tundra fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
4.0L 6-cylinder 1GR-FEAB60E automatic12.3 qtWSDOT 3rear GL-5 75W-85 4.85 qt
front GL-5 75W-85 2.2 qt
4.6L 8-cylinder 1UR-FEA760E automatic11.3 qtWSDOT 3rear GL-5 75W-85 4.85 qt
front GL-5 75W-85 2.2 qt
transfer case GL-4 1.15 qt
5.7L 8-cylinder 3UR-FBEAB60E automatic11.7 qtWSDOT 3rear GL-5 75W-85 3.8 qt
front GL-5 75W-85 2.2 qt
transfer case GL-4 1.15 qt
5.7L 8-cylinder 3UR-FEA760E automatic11.8 qtWSDOT 3rear GL-5 75W-85 3.8 qt
front GL-5 75W-85 2.2 qt
transfer case GL-4 1.15 qt

Fluids for the 2010 Toyota Tundra

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2010 Toyota Tundra specs

Other Tundra years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.