2013 Toyota Venza transmission fluid capacity and fluid specs

GarageDex's fluid data shows the 2013 Toyota Venza (2.7L 4-cylinder 1AR-FE) uses the U660E automatic transmission, which holds 6.9 quarts of fluid as a total fill, specified as WS. Other engines on this year hold 6.9 to 7.1 quarts - see the table. Brake fluid is DOT 3.

Shop WS fluid Match the specification on the bottle to your manual

Key takeaways

  • Transmission: U660E automatic transmission, 6.9 qt total fill, WS fluid.
  • Total fill is the whole system; a drain-and-refill takes a third to half.
  • Brake fluid: DOT 3.
  • The fluid specification is named by the source - buy a fluid that lists it.
2013 Toyota Venza fluids by engine
EngineTransmissionTotal fillFluid specBrake fluidGear oil
2.7L 4-cylinder 1AR-FEU660E automatic6.9 qtWSDOT 3rear GL-5 0.55 qt
transfer case GL-5 0.85 qt
3.5L 6-cylinder 2GRFEU760F automatic7.1 qtWSDOT 3rear GL-5 0.55 qt
transfer case GL-5 0.85 qt

Fluids for the 2013 Toyota Venza

Buy fluid that states the specification your manual names. Multi-vehicle fluids list the specs they meet on the back label - if yours is not listed, it is the wrong bottle.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other 2013 Toyota Venza specs

Other Venza years

Source: World's Best Oil (AMSOIL dealer cross-reference). Capacities are total system fills; a drain-and-refill takes less. Where no fluid specification is shown, the source lists only a catalog code, so use the specification printed in your owner's manual - the wrong transmission fluid damages a transmission.