Generac GP6500 oil type and capacity and spark plug

GarageDex's data from Generac's own published specs: the Generac GP6500 takes SAE 30, 10W-30 or synthetic 5W-30 (see ambient temperature chart) oil (1.0 L (1.06 qt)) and a Bosch F7TC or equivalent (Generac part 0J00620106) spark plug gapped 0.028-0.031 in (0.70-0.80 mm). It is rated 6,500 running watts and 8,125 starting watts.

Shop 10W-30 oil The spec in the Generac GP6500 manual

Key takeaways

  • Oil capacity: 1.0 L (1.06 qt). Add it in stages and stop at the dipstick's full mark rather than pouring the whole amount at once.
  • Spark plug: Bosch F7TC or equivalent (Generac part 0J00620106), gap 0.028-0.031 in (0.70-0.80 mm).
  • Every value on this page is quoted from Generac's own manual or spec page, linked beside it.
Generac GP6500 maintenance specs
ItemSpecFrom the manual
Engine oilSAE 30, 10W-30 or synthetic 5W-30 (see ambient temperature chart)Manual gives an oil chart by ambient temperature; petroleum oil supplied for break-in“SAE 30 10W-30 Synthetic 5W-30” source
Oil capacity1.0 L (1.06 qt)“Oil Capacity 1.0 L (1.06 qt.)” source
Spark plugBosch F7TC or equivalent (Generac part 0J00620106)“Spark Plug Type Bosch F7TC or equivalent” source
Spark plug gap0.028-0.031 in (0.70-0.80 mm)“Spark Plug Gap 0.028-0.031 inch or (0.70-0.80 mm)” source
Fuel tank7.9 gal (29.9 L)“Gasoline Capacity 29.9 L (7.9 gal)” source
First oil changechange oil after first 30 hours“Change oil after first 30 hours of operation,” source

Parts for the Generac GP6500

Each Buy button searches Amazon for the exact spec in the manual.

  • Engine oil
    10W-30, 1.0 L (1.06 qt)Buy
  • Spark plug
    Bosch F7TC or equivalent (Generac part 0J00620106)Buy

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Other Generac generators

Source: Generac GP Series (GP6500/GP6500E/GP8000E) Owner's Manual (PDF). If your unit's own manual or label differs, follow it.