Dodge Avenger lug nut torque

GarageDex's lug nut torque data shows the 2008 to 2014 Dodge Avenger wheel lug nuts torque to 100 ft-lbs. They are 12mm x 1.50 lug nuts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 100 ft-lbs for the 2008 to 2014 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Dodge Avenger lug nut torque by year
YearsTorquePattern
2008 to 2014100 ft-lbsStar pattern
1999 to 200065-80 ft-lbsStar pattern
1995 to 199885-100 ft-lbsStar pattern
Dodge Avenger lug nut thread size
YearsThread size
1995 to 201412mm x 1.50

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Dodge Avenger.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Dodge Avenger wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 100 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Dodge models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.