GarageDex

Dodge Charger SRT Models lug nut torque

GarageDex's lug nut torque data shows the 2015 to 2021 Dodge Charger SRT Models wheel lug nuts torque to 111 ft-lbs.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 111 ft-lbs for the 2015 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Dodge Charger SRT Models lug nut torque by year
YearsTorquePattern
2015 to 2021111 ft-lbsStar pattern

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Dodge Charger SRT Models.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Dodge Charger SRT ModelsShop lug nuts Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Dodge Charger SRT Models wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 111 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Dodge models

AvengerB1500B2500B3500B3500 HDCaliberCaravanChallengerChallenger SRT ModelsChargerDakotaDartDurangoDurango SRTGrand CaravanIntrepidJourneyMagnumNeonNitroOmni/Shadow/SpiritRam 1500Ram 1500 VanRam 2500

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.