GarageDex

Ferrari 348 lug nut torque

GarageDex's lug nut torque data shows the 1995 Ferrari 348 wheel lug nuts torque to 72 ft-lbs. Across the Ferrari lineup, that guide lists 14mm x 1.50 wheel bolts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 72 ft-lbs for the 1995 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Ferrari 348 lug nut torque by year
YearsTorquePattern
199572 ft-lbsStar pattern
Ferrari 348 lug nut thread size
YearsThread size
2000 to 201914mm x 1.50 bolt

The guide below does not break out the Ferrari 348 separately - this is the general Ferrari thread size, same source.

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Ferrari 348.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Ferrari 348Shop lug nuts Wheel locks14mm x 1.50 anti-theft bolt setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Ferrari 348 wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 72 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Ferrari models

F40/F50F355/F512M456/512550/575

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.