GarageDex

Fiat 500L with Steel Wheels lug nut torque

GarageDex's lug nut torque data shows the 2014 to 2016 Fiat 500L with Steel Wheels wheel lug nuts torque to 63 ft-lbs. Across the Fiat lineup, that guide lists 12mm x 1.25 wheel bolts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 63 ft-lbs for the 2014 to 2016 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Fiat 500L with Steel Wheels lug nut torque by year
YearsTorquePattern
2014 to 201663 ft-lbsStar pattern
Fiat 500L with Steel Wheels lug nut thread size
YearsThread size
2000 to 202012mm x 1.25 bolt

The guide below does not break out the Fiat 500L with Steel Wheels separately - this is the general Fiat thread size, same source.

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Fiat 500L with Steel Wheels.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Fiat 500L with Steel WheelsShop lug nuts Wheel locks12mm x 1.25 anti-theft bolt setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Fiat 500L with Steel Wheels wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 63 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Fiat models

500124 Spider500 with Steel Wheels500L500X

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.