Ford GT lug nut torque

GarageDex's lug nut torque data shows the 2017 to 2021 Ford GT wheel lug nuts torque to 150 ft-lbs.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 150 ft-lbs for the 2017 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Ford GT lug nut torque by year
YearsTorquePattern
2017 to 2021150 ft-lbsStar pattern
2005 to 200611 ft-lbsStar pattern

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Ford GT.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Ford GT wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 150 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Ford models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.