GarageDex

Jaguar E-Pace lug nut torque

GarageDex's lug nut torque data shows the 2018 to 2021 Jaguar E-Pace wheel lug nuts torque to 98 ft-lbs. They are 14mm x 1.50 lug nuts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 98 ft-lbs for the 2018 to 2021 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Jaguar E-Pace lug nut torque by year
YearsTorquePattern
2018 to 202198 ft-lbsStar pattern
Jaguar E-Pace lug nut thread size
YearsThread size
2018 to 202014mm x 1.50

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Jaguar E-Pace.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Jaguar E-PaceShop lug nuts Wheel locks14mm x 1.50 anti-theft nut setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Jaguar E-Pace wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 98 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Jaguar models

F-PaceF-Type/XEI-PaceS-TypeSuper V8/Vanden PlasXF/XFR/XFR-S/XJ/XJ8/XJRXK/XKR/XKR-S

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.