Land Rover Range Rover lug nut torque
GarageDex's lug nut torque data shows the 2019 to 2021 Land Rover Range Rover wheel lug nuts torque to 103 ft-lbs. Across the Land Rover lineup, that guide lists 14mm x 1.50 lug nuts.
Key takeaways
- Torque: 103 ft-lbs for the 2019 to 2021 model years.
- Tighten in a star (criss-cross) pattern so the wheel seats flat.
- Re-check torque after 50 to 100 miles.
- Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
| Years | Torque | Pattern |
|---|---|---|
| 2019 to 2021 | 103 ft-lbs | Star pattern |
| 2013 to 2018 | 98 ft-lbs | Star pattern |
| 2003 to 2012 | 103 ft-lbs | Star pattern |
| 1996 to 2002 | 84 ft-lbs | Star pattern |
| 1995 | 90-95 ft-lbs | Star pattern |
| Years | Thread size |
|---|---|
| All model years | 14mm x 1.50 |
The guide below does not break out the Land Rover Range Rover separately - this is the general Land Rover thread size, same source.
Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.
Tools for the job
These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Land Rover Range Rover.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
How to torque Land Rover Range Rover wheels
- Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
- Lower the car until the tire just touches and cannot spin.
- Set the wrench to 103 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
- Lower fully, go around once more at the same setting.
- Re-check after 50 to 100 miles.
Same car, other specs: Land Rover Range Rover specs hub and battery size.
Other Land Rover models
Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.