Lincoln Continental lug nut torque

GarageDex's lug nut torque data shows the 2017 to 2020 Lincoln Continental wheel lug nuts torque to 162 ft-lbs. They are 14mm x 1.50 lug nuts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 162 ft-lbs for the 2017 to 2020 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Lincoln Continental lug nut torque by year
YearsTorquePattern
2017 to 2020162 ft-lbsStar pattern
Lincoln Continental lug nut thread size
YearsThread size
2017 to 202014mm x 1.50
1988 to 200212mm x 1.50
1939 to 19871/2"

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Lincoln Continental.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Lincoln Continental wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 162 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Lincoln models

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.