GarageDex

Lincoln MKS lug nut torque

GarageDex's lug nut torque data shows the 2007 to 2016 Lincoln MKS wheel lug nuts torque to 100 ft-lbs. They are 1/2" lug nuts.

Shop torque wrenches A 1/2-inch click wrench covers every value on this page

Key takeaways

  • Torque: 100 ft-lbs for the 2007 to 2016 model years.
  • Tighten in a star (criss-cross) pattern so the wheel seats flat.
  • Re-check torque after 50 to 100 miles.
  • Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
Lincoln MKS lug nut torque by year
YearsTorquePattern
2007 to 2016100 ft-lbsStar pattern
Lincoln MKS lug nut thread size
YearsThread size
2009 to 20161/2"

Seat type (cone, mag, or ball) and hex size are not given per vehicle by this source - match them to the lug nut already on your wheel before ordering locks. Source: White Knight Wheel Accessories - 2020 Application Guide.

Tools for the job

These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Lincoln MKS.

Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Lincoln MKSShop lug nuts Wheel locks1/2" anti-theft nut setShop wheel locks Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

How to torque Lincoln MKS wheels

  1. Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
  2. Lower the car until the tire just touches and cannot spin.
  3. Set the wrench to 100 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
  4. Lower fully, go around once more at the same setting.
  5. Re-check after 50 to 100 miles.

Other Lincoln models

AviatorBlackwoodContinentalCorsairLSMark LTMKCMKTMKXMKZNautilusNavigator 19 mm HexNavigator 21 mm HexTown CarZephyr

Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.