Ram 35000 lug nut torque
GarageDex's lug nut torque data shows the 2011 to 2021 Ram 35000 wheel lug nuts torque to 130 ft-lbs.
Shop torque wrenches A 1/2-inch click wrench covers every value on this page
Key takeaways
- Torque: 130 ft-lbs for the 2011 to 2021 model years.
- Tighten in a star (criss-cross) pattern so the wheel seats flat.
- Re-check torque after 50 to 100 miles.
- Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
| Years | Torque | Pattern |
|---|---|---|
| 2011 to 2021 | 130 ft-lbs | Star pattern |
Tools for the job
These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Ram 35000.
Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Ram 35000Shop lug nuts Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
How to torque Ram 35000 wheels
- Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
- Lower the car until the tire just touches and cannot spin.
- Set the wrench to 130 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
- Lower fully, go around once more at the same setting.
- Re-check after 50 to 100 miles.
Other Ram models
Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.