Saab 900 with Alloy Wheels lug nut torque
GarageDex's lug nut torque data shows the 1995 to 1998 Saab 900 with Alloy Wheels wheel lug nuts torque to 78 to 96 ft-lbs.
Shop torque wrenches A 1/2-inch click wrench covers every value on this page
Key takeaways
- Torque: 78 to 96 ft-lbs for the 1995 to 1998 model years.
- Tighten in a star (criss-cross) pattern so the wheel seats flat.
- Re-check torque after 50 to 100 miles.
- Aftermarket wheels or lug nuts can specify a different value - use the wheel maker's figure if it differs.
| Years | Torque | Pattern |
|---|---|---|
| 1995 to 1998 | 78-96 ft-lbs | Star pattern |
Tools for the job
These fit any vehicle. Lug nuts and wheel locks are vehicle-specific, so that link searches by your Saab 900 with Alloy Wheels.
Torque wrench1/2-inch drive click wrench, 20 to 150 ft-lbsShop wrenches Lug nutsReplacement lug nuts filtered to the Saab 900 with Alloy WheelsShop lug nuts Torque sticksLimits an impact gun so you cannot over-tightenShop torque sticks
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
How to torque Saab 900 with Alloy Wheels wheels
- Hand-thread every lug nut, then snug them lightly with the wheel off the ground.
- Lower the car until the tire just touches and cannot spin.
- Set the wrench to 78 to 96 ft-lbs and tighten in a star pattern, skipping to the opposite nut each time.
- Lower fully, go around once more at the same setting.
- Re-check after 50 to 100 miles.
Other Saab models
Source: James Halderman - Lug Nut Torque Values 1995-2021. Torque values assume clean, dry threads and OEM wheels. Always confirm against your owner's manual, and re-check torque after the first 50 to 100 miles.